QSC MP-A80V
010062
QSC MP-A80V professional eight channel amplifier with up to a total of 8 x 200W at 4Ω/8Ω and up to 200 watts into 70V or 100V loads. The MP-A80V incorporates FlexAmp Technology that allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio.
€3,813.00
Tax included
QSC MP-A80V professional eight channel amplifier with up to a total of 8 x 200W at 4Ω/8Ω and up to 200 watts into 70V or 100V loads. The MP-A80V incorporates FlexAmp Technology that allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio. It has a Class-D output circuitry and switchmode power supply for high efficiency and low cost of ownership and also Auto-standby (after 28 minutes with seamless auto-ramp when signal returns) and remote standby input. The MP-A Series offers an incredible amount of flexibility for business music and paging applications. Rack Mount 1U. Dimensions (WxDxH) 483 x 377 x 44mm - 5,8kg
- Category
- Power Amplifier Power Amplifier 100V
- Amplifier Type
- Professional
- Power 4Ohms
- 200 W
- Power 8Ohms
- 200 W
- Power 100V
- 200 W
- High Impedance Output
- 4Ohm, 8Ohm, 70V/100V
- Channels
- 8
- Amp Class
- Class D
- Signal to Noise Ratio
- > 103 dB
- Frequency Response
- 20Hz - 20kHz, +/- 0.5 dB
- Inputs
- 8 x Euroblock 3-Pin
- Outputs
- 4 x Euroblock 4-Pin
- Protective Cirquits
- DC fault, Short circuit, Overload, Open circuit, Temperature, RF protection
- Indicators
- Power, signal (per channel), limit / mute / protect (per channel)
- Capabilities and Operations
- FlexAmp technology, allows a total power of 400 W, in any ratio
- Rack Unit
- 1U
- Width (mm)
- 483
- Height (mm)
- 44
- Depth (mm)
- 377
- Weight (kg)
- 5.8
- Condition
- New
- MPN
- MP-A80V
Products from the same category
Q-SYS PL-DC26 2x6" Two-way point source loudspeakers with directivity control
SKU: 010049
On request
€1,736.00
QSC MP-A80V professional eight channel amplifier with up to a total of 8 x 200W at 4Ω/8Ω and up to 200 watts into 70V or 100V loads. The MP-A80V incorporates FlexAmp Technology that allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio.